|
 To
make a monster mask
1.
Cut out 'Base Mask' (use Halloween Monster Mask Template 1)
and 'Base Jaw' (use Halloween Monster Mask Template 2) from green
card.
2.
Stick top of jaw to bottom of base mask using double-sided tape.
3.
Adjust jaw to fit.
4.
Cut out parts 1-4 from green card, parts 5-7 from black card, part
8 from brown card and part 9 from white card. (Use Halloween
Monster Mask Templates 3, 4 & 5.)
5.
Stick 'Hair' (part 5) to top of 'Head' (part 1) using double-sided
tape.
6.
Stick 'Eyes' (part 9) in place, lining up holes using double-sided
tape.
7.
Stick 'Eyelids' (part 8) above eyes using double-sided tape.
8.
Stick part 6 along bottom edge of eyelids using double-sided tape.
9.
Stick part 7 around each eye using double-sided tape.
10.
Glue one green pom pom to a cheek, using all purpose glue.
Ask
your teacher if you should add any other features.
11.
Fold over top of 'Mouth' (part 4) to form a lip.
12.
Turn mouth over so the fold is facing you.
13.
Glue red pipe cleaner along folded edge of card. (Fold ends in to
avoid sharp points.)
14.
Bend mouth into curve.
15.
Stick mouth onto jaw.
16.
Glue second green pom pom to jaw.
Ask
your teacher if other features should be added.
17.
Bend tabs back on Base Mask.
18.
Glue ears to either side of head.
19.
Stick jaw (part 2) to base jaw using double-sided tape. Use nose
hole as a guide.
20.
Put small strip double-sided tape on edge of ears.
21.
Curve face and stick to Base Mask, lining up X's.
22.
Fold tabs of base mask in half, towards the mask. Fold in half again.
23.
Tie elastic to tab and staple (Make sure staple points are away
from face).
24.
Repeat step 23 for other side.
|
