|
To make a monster
mask
1. Cut out 'Base Mask' (use
Halloween Monster Mask Template 1) and 'Base Jaw' (use
Halloween Monster Mask Template 2) from green card.
2. Stick top of jaw to bottom
of base mask using double-sided tape.
3. Adjust jaw to fit.
4. Cut out parts 1-4 from
green card, parts 5-7 from black card, part 8 from brown card
and part 9 from white card. (Use Halloween Monster Mask
Templates 3, 4 & 5.)
5. Stick 'Hair' (part 5) to
top of 'Head' (part 1) using double-sided tape.
6. Stick 'Eyes' (part 9) in
place, lining up holes using double-sided tape.
7. Stick 'Eyelids' (part 8)
above eyes using double-sided tape.
8. Stick part 6 along bottom
edge of eyelids using double-sided tape.
9. Stick part 7 around each
eye using double-sided tape.
10. Glue one green pom pom
to a cheek, using all purpose glue.
Ask your teacher if you
should add any other features.
11. Fold over top of 'Mouth'
(part 4) to form a lip.
12. Turn mouth over so the
fold is facing you.
13. Glue red pipe cleaner
along folded edge of card. (Fold ends in to avoid sharp points.)
14. Bend mouth into curve.
15. Stick mouth onto jaw.
16. Glue second green pom
pom to jaw.
Ask your teacher if other
features should be added.
17. Bend tabs back on Base
Mask.
18. Glue ears to either side
of head.
19. Stick jaw (part 2) to
base jaw using double-sided tape. Use nose hole as a guide.
20. Put small strip double-sided
tape on edge of ears.
21. Curve face and stick to
Base Mask, lining up X's.
22. Fold tabs of base mask
in half, towards the mask. Fold in half again.
23. Tie elastic to tab and
staple (Make sure staple points are away from face).
24. Repeat step 23 for other
side.
|
