| |
 |
 |
|
|
|
|
|
| |
 |
|
What
You Need:
Felt
- red,
black, pink,
white
Wadding fabric
- white
Keyring fob
- gold coloured
Pom pom
Wobbly eyes
Needlework
pins
Press stud
fixing
PVA glue
Scissors
Pencil
Optional:
Cotton
thread
- red, black
and white
Sewing needle
|
|
 |
| |
Click
here for a
printer friendly
page of Santa Keyring/Purse
instructions.
|
| |
| |
| |
|
|
|
| |
|
|
| |
|
 |
| |
|
|
|
|
| |
|
IMPORTANT
NOTE:
1. If using glue always wait for glue to dry before doing next step.
2. Read all instructions for each section before making.
|
 |
|
Cut
out shapes using templates 1 & 2 provided:
1. Mark out shapes on felt, using templates. (Note: Templates show
colours to be used.)
2. Cut out all shapes.
|
| |
|
|
| |
|
To
make the boots:
1. Find two felt boot shapes (black.)
2. Fold one felt boot shape in half.
3. Glue, or sew, edges together, leaving top open.
4. Stuff boot with wadding fabric.
5. Glue or sew top edges together.
6. Repeat for other boot.
|
| |
|
|
| |
|
To
make the legs:
1. Find one 'trouser leg' felt shape (red), one 'trouser leg trim'
(white) and one boot (black).
2. Stick one 'trouser leg trim' to edge of leg shape.
3. Fold trouser leg shape in half and glue or sew around top of
boot.
4. Repeat for other boot.
|
| |
|
|
| |
|
To
make the arms:
1. Find two jacket arm shapes (red), two jacket cuff shapes(white)
and two hand shapes (pink).
2. Stick jacket cuff to one end of the jacket arm.
3. Fold jacket arm in half.
4. Sew or glue edges together, leaving white cuff edge open.
5. Stuff arm with wadding fabric.
6. Sew or glue open end of arm.
7. Repeat for other arm.
|
| |
|
|
| |
To
make the hat:
1. Find hat and hat trim felt pieces.
2. Stick white 'trim' to bottom edge of 'hat'.
3. Fold outside edges of hat to meet in middle.
4. Glue or sew straight edges together, creating seam down middle
of hat back.
5. Glue or sew pom-pom to top of hat.
6. Carefully sew press-stud to back layer of hat, approximately
2cm down from point.
|
| |
|
|
|
|
|
To
make the body and purse:
1. Find two red circles, one pink circle, arms, legs.
2. Create a neat pile of felt circles - two red circles, wadding
fabric, one pink circle.
3. Between top red circle and pink circle, insert arms either side
of body.
4. Between top red circle and pink circle, insert legs at bottom.
5. Secure pieces in place with needle work pins.
6. Sew around edge of circles, creating body. (Ensure arms and legs
are secured.)
7. Add more wadding if required.
8. REMEMBER: When sewing to leave top edge between two red
circles open. This is opening for purse.
9. Sew press-stud fastener on to back of body (middle of bottom
red circle) - make sure you only sew fastener to one layer.)
|
| |
|
 |
To
make the face:
1.
Find completed body, hair, beard, moustache and wobbly eyes.
2. Stick hair, beard, moustache and wobbly eyes in place on pink
circle using PVA glue.
3. Place hat on head so that trim rests just above eyes.
4. Glue or sew hat into position, making sure a gap is left in top
edge for purse opening.
5. Stitch key-ring fob into place, just below hat trim.
|
| |
| |
| |
|
|
| |
|
|
|
|
| |
|
The
information contained within this project sheet is presented in good faith,
but no warranty is given, nor results guaranteed. Product quantities and selections
may vary at each HobbyCraft Superstore. Products are subject to availability
and not all ranges are available in all stores. Before making a special journey
please contact the store direct to check that they have your required product
in stock. HobbyCraft Group Ltd disclaims all liability from any injury to anyone
undertaking the construction of this project as a result of improper safety
precautions. Since we have no control over physical conditions surrounding the
application of the information herein contained, HobbyCraft Group Ltd disclaims
any liability for untoward results.
|
| |
