HobbyCraft - Styrofoam Frames


		Click here to print this page
Allow: 20 mins Plus drying time	Level: Beginner	Click here to print this page

Styrofoam Frames

What You Need:

Styrofoam photo frame

Tissue paper – assorted colours and designs

PVA glue

Brush

Remove the backing section from the frame (do not discard as this will be replaced when the frame is dry).

Tear one sheet of each tissue paper type into small squares.

Brush glue onto a section of the frame. Using one type of tissue paper, place the tissue squares onto the frame overlapping them slightly and allowing the paper to wrap around the frame onto the reverse.

Smooth the paper pieces gently with the brush as you go. They may appear wrinkly at this stage, but will shrink as they dry.

Add more glue, then apply another colour tissue paper more randomly.

Finally add the patterned paper with a coat of glue on top and leave to dry.

The information contained within this project sheet is presented in good faith, but no warranty is given, nor results guaranteed. Product quantities and selections may vary at each HobbyCraft Superstore. Products are subject to availability and not all ranges are available in all stores. Before making a special journey please contact the store direct to check that they have your required product in stock. HobbyCraft Group Ltd disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. Since we have no control over physical conditions surrounding the application of the information herein contained, HobbyCraft Group Ltd disclaims any liability for untoward results.