Allow: 20 mins  per glass Level: Beginner Click here
to print this page
Allow: 20 mins
per glass
Level: Beginner
 
 
You Can Make   Leaf Champagne Glass Trim

What You Need:

Skeleton
leaf

3mm wide
ribbon

Double sided
tape

Scissors

 
 
 
 
 
 

 

 
Leaf Champagne Glass Trim
       
  How To Make
       
 

1. Stick a small piece of double side tape to the centre of a skeleton leaf.

2. Remove the backing paper from the tape and wrap the leaf half way up a glass, making sure the tape has stuck the leaf to the glass.

2. Cut a 15cm length of 3mm wide ribbon, and tie around middle of leaf, securing with a bow at the back of the glass.

 
 
 

The information contained within this project sheet is presented in good faith, but no warranty is given, nor results guaranteed. Product quantities and selections may vary at each HobbyCraft Superstore. Products are subject to availability and not all ranges are available in all stores. Before making a special journey please contact the store direct to check that they have your required product in stock. HobbyCraft Group Ltd disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. Since we have no control over physical conditions surrounding the application of the information herein contained, HobbyCraft Group Ltd disclaims any liability for untoward results.

 
Hobbycraft The Arts & Crafts Superstore
Last updated: July 18, 2005 © HobbyCraft