Cut 5 to 10 pieces of wire half as long again as the required length of the necklace. The more wires, the chunkier the necklace will be.
Thread a seed bead onto one of the pieces of wire, leaving 5cm at the end of the wire. Thread the wire through the bead again to form a loop around the bead and pull tight so the bead is fixed in place.
Thread seed beads and assorted glass beads loosely onto the wire in a random pattern. At approx 5cm intervals, loop the wire through a seed bead finishing with a fixed seed bead. Leave 5cm of wire at the other end.
Repeat steps 2 and 3 for each piece of wire, adding a central bead decoration to one of the pieces.
Twist each of the beaded lengths of wire together loosely. Coil the ends of the wires tightly together, forming a loop in one of the wires at one end and threading a bolt ring onto one of the wires at the other.
The
information contained within this project sheet is presented in good faith,
but no warranty is given, nor results guaranteed. Product quantities and selections
may vary at each HobbyCraft Superstore. Products are subject to availability
and not all ranges are available in all stores. Before making a special journey
please contact the store direct to check that they have your required product
in stock. HobbyCraft Group Ltd disclaims all liability from any injury to anyone
undertaking the construction of this project as a result of improper safety
precautions. Since we have no control over physical conditions surrounding the
application of the information herein contained, HobbyCraft Group Ltd disclaims
any liability for untoward results.
