 |
 |
Felt Stocking Card
|
 |
|
|
|
|
|
|
 |
|
What You Need:
Card blank
Coloured cord
Ribbon
Felt
Mini pegs
Tacky glue
Scotch tape
Double-sided tape
|
|
 |
| |
| |
| |
| |
| |
| |
|
|
|
| |
|
|
|
| |
 |
| |
|
|
|
| |
- Cut out two or three stocking shapes from felt. Cut the same number of rectangle shapes for the top of each stocking.
- Glue the rectangles of felt onto the top end of each stocking using tacky glue. Leave to dry.
- Cut lengths of cord the same width as the stockings and glue as stripes on the stockings using tacky glue. Leave to dry.
- Cut a length of ribbon or cord about 2cm longer than the width of the card blank. Arrange the ribbon on the front of the card blank, towards the top. Fold either end of the ribbon/cord inside the card blank and secure on the inside of the front of the card blank using scotch tape.
- Peg the finished stockings along the length of ribbon/cord.
- To cover up the ribbon ends on the inside of the card, cut a piece of card the same size as the front of the card and secure it inside the card using double sided tape.
|
|
| |
| |
 |
| |
The
information contained within this project sheet is presented in good faith,
but no warranty is given, nor results guaranteed. Product quantities and selections
may vary at each HobbyCraft Superstore. Products are subject to availability
and not all ranges are available in all stores. Before making a special journey
please contact the store direct to check that they have your required product
in stock. HobbyCraft Group Ltd disclaims all liability from any injury to anyone
undertaking the construction of this project as a result of improper safety
precautions. Since we have no control over physical conditions surrounding the
application of the information herein contained, HobbyCraft Group Ltd disclaims
any liability for untoward results.
|
|
| |
|
|
|
