Starting at the tail, thread the wire through a large oval bead. Thread the wire back through the bead several times to hold in place.
Add assorted large beads to form the body. Thread the wire through a brooch pin, between the beads, near the top of the body.
Add the ?head? bead then coil the wire to form the left antennae.
Make a figure eight of wire for the large wings and thread on small beads, twisting the wire around the body in the centre.
Repeat with a smaller figure eight for the small wings. Thread the loose wire end through the ?head? bead and coil it to form the right antennae.
The
information contained within this project sheet is presented in good faith,
but no warranty is given, nor results guaranteed. Product quantities and selections
may vary at each HobbyCraft Superstore. Products are subject to availability
and not all ranges are available in all stores. Before making a special journey
please contact the store direct to check that they have your required product
in stock. HobbyCraft Group Ltd disclaims all liability from any injury to anyone
undertaking the construction of this project as a result of improper safety
precautions. Since we have no control over physical conditions surrounding the
application of the information herein contained, HobbyCraft Group Ltd disclaims
any liability for untoward results.
