HobbyCraft - Special Day Card


		Click here to print this page
Allow: 30 mins	Level: Beginner	Click here to print this page

Special Day Card

What You Need:

Adhesive stones - silver, solid white and pale pink

Designer shapes

Pink general sentiments

Shape cutter & square templates

Designer brads spots

Scissors

Tool accessory kit

8.5 inch guillotine

Card - white, pale pink, fuchsia and green

Adhesive foam dots

Glue

Cut and fold white card to A6 size.

Cut three strips of card (green, pale pink and fuchsia) and glue them across the bottom of the white card.

Punch a row of four holes along the bottom strip using the tool kit. Pierce through spotted brads.

Embellish the top row with three adhesive stones.

Make a square aperture in your white card by cutting around the inner edge of the small square template.

Select a circular paper shape and turn it over to show the white side. Apply your sticker sentiment and use glue or a small piece of tape to attach the string just above the top edge of the aperture.

Make a frame for the aperture by cutting around the external edge of the small square template onto fuchsia card. Attach the frame to the card using adhesive foam dots.

Embellish the frame with silver, pink and solid white adhesive stones.

The information contained within this project sheet is presented in good faith, but no warranty is given, nor results guaranteed. Product quantities and selections may vary at each HobbyCraft Superstore. Products are subject to availability and not all ranges are available in all stores. Before making a special journey please contact the store direct to check that they have your required product in stock. HobbyCraft Group Ltd disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions. Since we have no control over physical conditions surrounding the application of the information herein contained, HobbyCraft Group Ltd disclaims any liability for untoward results.