 |
 |
 |
 |
 |
 |
|
|
 |
| |
|
Glass paints
Glass
outliner
Glass
or glass item
Paint
palette
Paint
brush
Sponge
White
spirit (for solvent based colours)
Ballpoint
pen
|
|
 |
|
 |
 |
|
|
| |
|
|
|
|
|
In
this beginner's guide to glass painting, you'll discover everything
you need to get started in this popular craft.
|
| |
 |
|
|
| |
|
|
|
|
|
Paints
There
are two different types of glass paint - waterbased and non-waterbased.
Both have a good range of colours and are intermixable within their
ranges.
Waterbased
paints can be diluted with water, tools are easy to clean,
drying time is 20 minutes, fully dry in 2 or 3 days.
Non-waterbased
paints can be diluted with ceramic thinner, brushes can be cleaned
in white spirit or thinner, drying time is 2 hours, fully dry in
8 hours.
|
 |
|
Outliners
There
are three different ways of applying an outline in glass painting:
1.
Glass Paint Outline stickers - these are ideal for beginners
and are best used on flat, smooth surfaces. Starting in one corner,
gently peel up the sticker taking care not to stretch or distort
it and apply it to a clean glass surface. When using a large sticker,
the most accurate way to position it is to lay it sticky side up
on a flat surface. Place the glass item over the top of the sticker
then press down firmly. This method will only work with transparent
projects.
2.
Glass paint outliners - these are applied by squeezing from
a tube to provide a fine outline. They come in a range of colours.
They can be used as an outline for your design before paint is applied
or piped over a pre-painted surface as fine detailing.
3.
Leading tape - this is another way of creating an outline for
your design, particularly on doors and windows. The leading tape
comes on a roll in two different widths. Peel off the backing tape,
stick it onto the glass and bend it to fit your design.
|
|
 |
| |
|
Always squeeze a little outliner into a tissue to check
there are no blockages or airbubbles in the nozzle.
As you work, keep wiping the tip. This should help prevent
lines becoming too thick.
|
|
 |
|
 |
 |
|
|
| |
|
|
|
|
|
Preparing
glass
Before
starting to paint, remove any traces of dust and grease from the
surface to ensure good adherence. Use a solvent such as white spirit
or methylated spirit.
|
 |
|
Transferring
designs
When
working on a flat surface such as a clip frame or acetate, the design
can be traced straight through. Flat surfaces are the easiest to
work on so if painting a window or door, try to lay it on a horizontal
surface. To transfer a design onto a more rounded piece such as
a vase, you will need to fix the design to the inside of the glass.
|
 |
Using
Outliners
To create a straight line with outliner touch the nozzle onto
the glass surface then applying a gentle, even pressure, lift
the nozzle away from the surface and stretch the outliner along
in a straight line. Touch the nozzle down on the glass surface
at the end of your line.
|
 |
|
Applying
the paint
When
filling in areas between outlines with a brush, apply paint generously
by puddling the paint or using a pipette. This will give a flat,
stained-glass effect. To get a lighter colour paint, dilute with
water for the water based paint or gloss varnish for the non-water
based paints.
Always
pour paint into a palette rather than using straight from the jar.
This prevents colours becoming dirty or diluted. Sponging is another
way of applying glass paint, this is good for covering large areas
and blending colours while wet. The first coat can also be allowed
to dry then oversponged with a second colour.
|
|
 |
| |
|
Always prepare your surface by wiping the surface with
a solvent (such as white spirit or methylated spirit)
to remove grease and surface dust.
|
|
 |
|
 |
|
Finishing
You
may want to protect your solvent based paint with a coat of varnish.
Glass paint varnish comes in a gloss or matt finish. The gloss varnish
can be used as a colourless thinner to obtain pastel shades, without
affecting the transparency and depth of colour. The matt varnish
gives a finish like frosted glass.
To
add finishing touches to a project, while the paint is still wet,
you can use tweezers to add beads or sequins. The wet paint will
act as a glue. You can also add glitter by sprinkling it over the
wet paint.
Glass
paint should be used only for decorative objects, the colours are
not dishwasher proof. It can however be cleaned by wiping with a
damp cloth.
|
 |
Project
ideas for glass painting:
Greetings
cards
Wine glasses
Mirrors
Clip Frames
Vases
Votives
Suncatchers
Mobiles
And many more...
|
 |
|
The
information contained within this craft technique sheet is presented
in good faith, but no warranty is given, nor results guaranteed.
Product quantities and selections may vary at each HobbyCraft Superstore.
Products are subject to availability and not all ranges are available
in all stores. Before making a special journey please contact the
store direct to check that they have your required product in stock.
HobbyCraft Group Ltd disclaims all liability from any injury to
anyone using this craft technique as a result of improper safety
precautions. Since we have no control over physical conditions surrounding
the application of the information herein contained, HobbyCraft
Group Ltd disclaims any liability for untoward results.
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|