0 BASKET
Cricut: How to Make Cute Pots with Vinyl Scraps
View all Ideas

Cricut: How to Make Cute Pots with Vinyl Scraps

Difficulty Beginner
Budget < £10
Time 1 hr +

Create a mischievous crew of decorative pots while using up your scrap Cricut vinyl pieces. Bring a little personality to any room, picking and choosing which face your pots will pull. These are wonderful gifts for friends or a lovely detail to spruce up your home décor.

The Cricut Maker was used to create this project; however, a Cricut Explore Air 2 or Joy machine can also be used.

Project and instructions by Hobbycraft Artisan Joey Daley.

This project contains paid-for content from Cricut’s Design Space app. Screen reference images are taken from the iPad version of Design Space.

You will need

select your items and add them to your basket below.

Equipment

Products

How to make

Step 1

Open Design Space and start a new project.  

Press the ‘i’ button and this will allow you to “View Image Sets”, taking you to all the linked images. Press the ‘i’ button and this will allow you to “View Image Sets”, taking you to all the linked images.

Step 2

Open the image library and search for “kawaii” in the search bar. Scroll down until you see an image with just eyes and a mouth feature, like the one shown.

Step 3

Select as many kawaii images as you have pots and insert them onto the canvas.

Step 4

Select one of the inserted images and the “Edit” menu. Measure each of your pots and one by one edit each image to the desired width size, also bear in mind the sizes of any scrap pieces of vinyl you intend to use.

Step 5

Top Tip: By using the “Sync” menu you can make sure your images are all the same colour to ensure they cut on the same cutting materials. Hold and drag the image/s that may be out of sync to the correct colour section.

Step 6

Press “Make it”, this will load the preview mat screen. Load you cutting mat with scraps of vinyl slightly bigger than your images, these can be all over the mat, but make sure they are the same types I.e., all removable vinyl.

Once perfectly aligned the camera will auto snap a picture of the mat to use.

Step 7

If using the “SnapMat” feature, align the camera with the top and bottom of you cutting mat.

Step 8

Reposition the images to the locations of the scraps you have placed on the mat by selecting each one and dragging into place, rotate if needed.

Step 9

Once happy, press “Continue” and follow the usual process to select your material type and cut out the images.

Step 10

Once cut, weed appropriately and transfer onto transfer tape.

Why not decorate a few of our pots with acrylic paints, coordinating your room colours, like ours here!

Step 11

Carefully transfer onto your desired pots for a cheeky addition to your home décor.

Your pots are now ready to display!

How to make cute pots with Cricut vinyl scraps

More Ideas You'll Love