0 BASKET
Image not available
View all Ideas

How to Make a Punch Needle Llama Jacket Patch

Difficulty Beginner
Budget £10 - £30
Time 1/2 day +

You will need

select your items and add them to your basket below.

Equipment

Products

How to make

Top tip! This technique is actually all worked onto the back of the fabric. The exception to this is the saddle.

Step-1

Begin by drawing the circle and the llama onto the reverse side of your fabric.
Top tip! I used the needle on setting 4 for this so that the body would be woolly and contrast nicely in texture with the saddle.

Step-2

Use the manufacturer’s instructions to load the embroidery needle with soft apricot and using a stabbing motion, embroider the llama body.

Step-3

Swap to sewing the needle and use a straight stitch to embroider the face and feet next with the same coloured yarn.

Step-4

Back to the Clover needle again and working from the front this time so that the texture is different; change the setting to 5 and do the saddle next in stripes of lemon, fuchsia and turquoise.

Step-5

With the hand sewing needle, make a halter with long straight stitches in three strands of black embroidery thread.
Top tip! this is a simple procedure of sewing the thread through at the bottom of the saddle and then tying it. Trim the tassels to about 2cm.

Step-6

Also with two strands of embroidery thread but purple this time, make some fringing on the saddle.
Top tip! take some time to arrange the letters and overlap them so that they have a cursive look. Ensure that they echo the circle rather than being too straight.

Step-7

Cut the letters to form the words ‘no drama llama!’ using the purple glitter iron on foil and the alphabet die. Arrange them onto your patch within the circle with ‘no drama’ at the top and ‘llama!’underneath.
Top tip! the glue on the back of the interfacing will help to secure your threads.

Step-8

From the S320 interfacing, cut a disk using the template and fuse it to the back of the patch so that it is directly inside the circle.
Top tip! A dab of fabric glue will help to keep the raw edge where it should be.

Step-9

Cut the patch out allowing a good margin (about 2.5cm) all around. Notch the edge of the fabric not quite to the edge of the interfacing. Fold the fabric over the interfaced circle and press.

Step-10

You can now attach your patch to clothing or a bag using either an invisible hand stitch or a decorative machine stitch.

More Ideas you'll love