Black PU Iron-On Vinyl 12 x 24 Inches
Is $ 18.00
Colour:
Please select
Quantity
Black PU Iron-On Vinyl 12 x 24 Inches
Available for home delivery
Rated 2 out of
5
by
Clo24 from
Not the best
I just decided to open mine up ready to make some iron on crafts. Half way down, there was a big crease where the roll clearly hadn’t been rolled properly. As I’ve decided to use it, the cut has not come out well in the slightest. I have used a brand new blade too. I physically cannot weed it as the vinyl is so stretchy it wouldn’t allow the cut through fully so it was still joint partially in areas to the main vinyl section. Definitely will stick to the Cricut brand.
I managed to iron one part on, to see how it came out. It irons on well and is very easy for the hot peeling. But that’s the only part I have found which is a good point.
Date published: 2023-02-22
Rated 5 out of
5
by
Ali boo from
Excellent product
I bought this a few days ago and it was my first ever attempt at using heat transfer vinyl. I didn’t want to spend a lot of money on branded vinyl and thought to give this one a go ( if I messed up it wouldn’t have been the end of the world) but boy was I blown away!!! It was so easy to use , peeled away and weeded without any problems and instead of making one t-shirt I made 3 all in one go. I was so reluctant to try iron on as I’m just about getting the hang of permanent vinyl ( new to the cricut world) but I will definitely pursue this new venture and I’ll definitely be trying out this product again. Why buy something double the price? I know I won’t be.
Date published: 2023-09-11
Rated 2 out of
5
by
alinipper from
Not Hot Peel!
I have used Cricut branded products previously, however decided to try this brand due to the slight cost saving. The vinyl cut and weeded no problem, but transferring to the t-shirt was a nightmare. The instructions state 140-150 degrees for 8-10 seconds, then 10-15 seconds on the reverse. It states this is a hot peel vinyl so peel the carrier sheet immediately. I followed these instructions exactly, and when trying to peel off the carrier sheet, the vinyl transfer came with it as it hadn't bonded to the t-shirt.
I then decided to wait until the item was completely cool before attempting to peel the carrier sheet, which worked perfectly. Why is this advertised as hot peel!?
Date published: 2025-05-18
Rated 2 out of
5
by
Shux from
Absolutely awful
A design that would usually take me 15 minutes to do, took me almost 2 hours! As one of the other reviewers said, it doesn’t seem to cut all the way through, it left sooo much uncut (it was partially cut) also it’s soo stretchy so when you are weeding plus it hasn’t cut through properly it just leaves a big mess. If you’re using this as a small business.. AVOID! If you’re new to cricut or making things for yourself/family, it’s cheap so it’s good to experiment with. I wouldn’t recommend it at all. Rather annoyed I wasted money on this and so much time. The only good thing as the other reviewer said is that it peels really really nicely, I’d say better than the actual brand so that’s a plus. However it’s an actual disaster waiting to happen.
Date published: 2023-04-13
Rated 1 out of
5
by
nessie71 from
Waste of money & doesn't work!
I followed the instructions on the box for temperature and application and used my Cricut heat press to apply. When the iron on refused to stick to the pencil cases I was making, I used the help info on the website, which issued a completely different set of guidance regarding pressing and peel timing!. I've used Cricut brand products and cheaper products purchased on Amazon in the past and never had an issue with iron on. This iron on doesn't work! A small part stuck to the pencil case (enough to ruin it) but mostly peeled off. Other iron on used in the design purchased from Amazon stuck perfectly, so it wasn't the fabric I was using/ Definitely won't buy again and will be returning to shop on my next trip to town
Date published: 2024-09-16
Rated 1 out of
5
by
Pp23 from
I returned my unused roll , not great
Very poor quality , I bought 2 rolls and returned the one I hadn't opened ... on multiple different attempts , blades and settings it wouldn't cut properly and made weeding an absolute hag , I wouldn't give any stars if I could and I'm not one to write reviews however if you are starting out and buy this for practice and such it cab be very frustrating and off putting making people think they are doing something wrong where it is purely the product
Date published: 2024-05-16
Rated 1 out of
5
by
Emistar from
Shocking!
What a disapointment! Did not cut through properly, even after cutting twice and adding more pressure. The material is so stretchy making it so difficult to weed. So upset I wasted my money on this vinyl, didn't even get to iron it on because I couldn't weed my designs with precision. Will stick to cricut brand in future.
Date published: 2024-01-09
Rated 2 out of
5
by
Lollipop16 from
Results hit and miss, not hot peel as advertised
I received this as a free gift when purchasing a Cricut heat press. I decided to try it on a plain white cotton
T shirt which had a stain I wanted to cover. My design required two mats. The first piece cut and weeded fine but would not stick to the fabric. The second piece hadn’t cut properly and was impossible to weed. Having read some of the other reviews, I persevered - increasing the cutting pressure helped a little, but it was still difficult to weed. I also left it to cool down completely rather than peeling straight away as instructed. This worked well. I haven’t worn or washed the T shirt yet so can’t comment on durability. I wasted most of the vinyl because it didn’t cut/ weed properly so you wouldn’t be saving money buying this instead of the more expensive Cricut.
Date published: 2025-07-13
Will this stick on working boiler suits I e over work names
I would think so I used it on t shirts, as long as it adheres to the fabric okay.
Date published: 2025-05-18
