1/3
Hard UV Curing Resin 100ml
Is
£10.00
£10.00 per 100ml
Quantity
Hard UV Curing Resin 100ml
Available for home delivery
Available for Click & Collect
.
Check stock in store.
Rated 5 out of
5
by
Nick Thepin from
BRILLIANT PRODUCT
It does exactly what I wanted it do. It is a brilliant product
Date published: 2026-01-12
Rated 5 out of
5
by
amr58 from
Fantastic for a small project!
I ddn't know this product existed until I went to my local Hobbycraft store and just happened on it after looking at the products in the model section. I had made a small pond with pebbles in it adjacent to a small fairy house and also a small witch's cauldron for the same project, both requiring a water effect. l didn't need much so this seemed perfect, and it was. I bought a UV torch of the correct strength after checking online and used the resin on both models in a few thin layers, pushing the thickish fluid around with a cocktail stick to fill all areas and looking for bubbles to pop, before shining the torch on it for a few minutes after each layer. I actually didn't get any bubbles although I could have done with a few for the cauldron! I tapped each layer to make sure it had set hard and it was perfect. The water effect is extremely clear and seems to be adhering very well. I didn't colour it because the models were painted with acrylic first. I still have some left.
Date published: 2026-11-07
Rated 5 out of
5
by
Keely1 from
Gives a lovely shiny finish on my air dry clay.
My first time using resin and I’ve used it on my air dry clay to give it a nice shiny finish.
Date published: 2026-09-15
Rated 5 out of
5
by
And3h from
Andy Horton
Got this resin for making some puddles on a diorama and it's worked a treat. very happy
Date published: 2026-08-22
Can you use this product with a paintbrush to put a finishing coat on a project? If so, what do you clean the paintbrush with or should it just be binned?
If choosing to apply with a paintbrush we would advise to use a soft paint or silicone brush and use a small amount so the brush is coated, not dripping and apply thin layers. Clean the brush immediately using isopropyl alcohol or pure acetone nail polish remover before the UV light or ambient light hardens the resin in the bristles.
Date published: 2026-10-14