Skip to Content (Press Enter) Skip to Footer (Press Enter)

How to Make a Pyrography Adventure Decoration

Level
Beginner
Time
1 hour
Budget
<10

This pyrography adventure decoration makes us all want to immediately pack our bags and head off on a woodland trip! Read the tutorial below by pyrography expert Rachel Richardson, who talks you through the step by step process of transferring the calligraphy design onto your log slice.

You will need

Is $ 12.00

Quantity: 1

Subtotal

Is $ 12.00

Total:

How to make

Step-1
Measure the wooden disc radius. When you create a design allow 5mm around the edge to ensure it fits. The font shown is Magnolia Sky, you can find free fonts available with a quick internet search. Once you have created your design, in the settings of your design software flip the image horizontally and print onto tracing paper.
Step-2
Cut off the excess tracing paper and place the ink side down onto the wood and tape into place.
p5_pyrography_step5.jpg?sw=680&q=85
Step-3
Using a pencil, gently rub over the image to transfer the ink onto the wood. Peel back the paper and check the pressure you have applied is enough.
Step-4
Allow the pyrography tool to heat up for approximately five to ten minutes. Use a round ended tip as it will flow easier when burning.
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 18ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Top